Free Timecode Calculator
Add or subtract timecodes, find clip duration, and convert frames or seconds. Choose your frame rate and keep the numbers in step with your edit.
Free. No signup. No file needed.
How to use the timecode calculator
Choose your task
Add or subtract durations, measure a clip between In and Out points, convert units, or total a list of clips.
Match your project
Choose the frame rate and DF or NDF counting. Enter your timecodes, frame count, or elapsed seconds.
Check and keep the result
See the timecode, total frames, and elapsed time together. Copy the result or download it with the settings attached.
Fewer scribbled sums. More actual editing.
What do the numbers in a timecode mean?
A timecode identifies a frame using hours, minutes, seconds, and frames: HH:MM:SS:FF. At 25 fps, 00:00:12:10 is 12 seconds and 10 frames from the origin. That's 310 frames, or 12.4 seconds.
The final pair counts frames, not hundredths of a second. Those last two digits are doing more work than they look.
Timecode calculation examples
Load an example to see the inputs, result, and settings together.
| Task | Frame rate | Calculation | Result | Load example |
|---|---|---|---|---|
| Add durations | 25 fps NDF | 00:00:12:10 + 00:00:07:20 | 00:00:20:05 · 505 frames | |
| Subtract durations | 25 fps NDF | 00:00:20:00 − 00:00:07:12 | 00:00:12:13 · 313 frames | |
| Convert frames | 25 fps NDF | 1,000 frames | 00:00:40:00 · 40 seconds | |
| Measure a clip | 24 fps NDF, exclusive Out | 01:00:00:00 to 01:00:10:00 | 00:00:10:00 · 240 frames |
Add up clip durations without the spreadsheet
Paste a list of durations or In/Out pairs and check every row before using the total. Keep one frame rate and counting mode for the list.
Add clip names so the export still makes sense tomorrow. Copy the total or download a CSV with each clip's duration, frame count, and settings. Your spreadsheet can sit this one out.
Drop-frame vs non-drop-frame timecode
Drop-frame timecode skips certain labels to keep the numbering close to elapsed clock time. It doesn't remove pictures from your video.
At 29.97 DF, 00:00:59;29 is followed by 00:01:00;02. Labels ;00 and ;01 are skipped at the start of each minute except every tenth minute.
Non-drop-frame keeps the labels in sequence. At fractional frame rates, its timecode clock and elapsed time drift apart. Always match your project's counting mode.
Why the frame rate changes the answer
One thousand frames last 40 seconds at 25 fps, but about 41.667 seconds at 24 fps. The frame count is the same; the playback duration isn't.
For fractional rates, this calculator uses 24000/1001, 30000/1001, or 60000/1001 internally. It shows timecode and elapsed seconds separately, so one isn't mistaken for the other.
Changing a rate setting reinterprets the input. To convert an existing value, choose whether to keep elapsed time or frame count in the conversion settings.
How the calculations work
The calculator converts valid timecodes to whole frame counts before adding, subtracting, or measuring a range. It then formats the answer using your selected rate and counting mode.
Clip duration uses Out minus In when Out is the first excluded frame. If Out is the last included frame, the calculation adds one frame.
For a handoff, copy the calculation with its frame rate and counting mode. A bare timecode can leave the next editor guessing.
Duration addition = frames(A) + frames(B)
Exclusive-Out duration = frames(Out) − frames(In)
Inclusive-Out duration = frames(Out) − frames(In) + 1
Elapsed seconds = total frames ÷ exact frame rate
Adobe documents inclusive In/Out marks.
FFmpeg's timecode helpers provide an implementation reference.
Plan export size from elapsed duration with the Video File Size Calculator.

